Lone-Pair Enhanced Birefringence in an Alkaline-Earth Metal Tin(II) Phosphate BaSn2(PO4)2

The first alkaline-earth metal tin(II) phosphate, BaSn₂(PO₄)₂, has been discovered, which consists of layered structures constructed from strictly alternating [SnO₃]⁴⁻ and [PO₄]³⁻ moieties. This compound is expected to have a large birefringence with Δn≈0.071 at 1064 nm, owing to the presence of stereochemically active lone pair metal cations.     

Enhanced 1T′-Phase Stabilization and Chemical Reactivity in a MoTe2 Monolayer through Contact with a 2D Ca2N Electride

Among the widely studied 2D transition metal dichalcogenides (TMDs), MoTe₂ has attracted special interest for phase-change applications due to its small 2H-1T′ energy difference, yet a large scale phase transition without structural disruption remains a significant challenge. Recently, an interesting long-range phase engineering of MoTe₂ has been realized experimentally by Ca₂N electride. However, the interface formed between them has not been well understood, and moreover, it remains elusive how the presence of Ca₂N would affect the basal plane reactivity of MoTe₂. To address this, we performed density functional theory (DFT) calculations to investigate the potential of tuning the phase stability and chemical reactivity of a MoTe₂ monolayer via interacting with Ca₂N to form a van der Walls heterostructure. We found that the contact nature at the 2H-MoTe₂/Ca₂N interface is Schottky-barrier-free, allowing for the spontaneous electron transfer from Ca₂N to 2H-MoTe₂ to make it strongly n-type doped. Moreover, Ca₂N doping significantly lowers the energy of 1T′-MoTe₂ and dynamically triggers the 2H-to-1T′ transformation. The Ca₂N-induced phase modulation can also be applied to tune the phase energetics of MoS₂ and MoSe₂. Furthermore, using H adsorption as the testing ground, we also find that the H binding on the basal plane of MoTe₂ is enhanced after forming heterostructure with Ca₂N, potentially providing basis for surface modification and other related catalytic applications.     

Nonmetal-to-metal transition in dense fluid helium

The nonmetal-to-metal transition in dense fluid helium is discussed, which has been, in analogy to metallization of hydrogen, predicted as first-order plasma phase transition using chemical models for the equation of state and plasma composition. However, recent ab initio simulations performed for dense fluid helium indicate that this transition is continuous in the considered regime, without a density jump and latent heat as characteristic of a first-order phase transition. Implications for some astrophysical plasmas are discussed.     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

On the swelling behavior of poly(N-Isopropylacrylamide) hydrogels exposed to perfluoroalkyl acids

Per- and polyfluoroalkyl substances (PFAS) have rapidly accumulated in the environment due to their widespread use prior to commercial discussion in the early 21st century, and their slow degradation has magnified concerns of their potential toxicity. Monitoring their distribution is, therefore, necessary to evaluate and control their impact on the health of exposed populations. This investigation evaluates the capability of a simple polymeric detection scheme for PFAS based on crosslinked, thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) hydrogels. Surveying swelling perturbations induced by several hydrotropes and comparable hydrocarbon analogs, tetraethylammonium perfluorooctane sulfonate (TPFOS) showed a significantly higher swelling ratio on a mass basis (65.5 ± 8.8 at 15°C) than any of the other analytes tested. Combining swelling with the fluorimetric response of a solvachromatic dye, nile red, revealed the fluorosurfactant to initiate observable aggregation (i.e., its critical aggregation concentration) at 0.05 mM and reach saturation (i.e., its charge neutralization concentration) at 0.5 mM. The fluorosurfactant was found to homogeneously distribute throughout the polymer matrix with energy dispersive X-ray spectroscopy, marking the swelling response as a peculiar nexus of fluorinated interfacial positioning and delocalized electrostatic repulsion. Results from the current study hold promise for exploiting the physiochemical response of PNIPAM to assess TPFOS's concentration.     

Global strong solution of 3D tropical climate model with damping

We establish the global well-posedness of a strong solution to the 3D tropical climate model with damping. We prove that there exists the global and unique solution for α, β, γ satisfying one of the following three conditions: (1) \alpha ,\beta \ge \mathrm{4}; (2) ; (3) .     

Enantioselective analysis of venlafaxine and its active metabolites: A review on the separation methodologies

Venlafaxine (VFX) is a serotonin and norepinephrine reuptake inhibitor chiral drug used in therapy as an antidepressant in the form of a racemate consisting of R‐ and S‐VFX. The two enantiomers of VFX exhibit different pharmacological activities: R‐VFX inhibits both norepinephrine and serotonin synaptic reuptake, whereas S‐VFX inhibits only the serotonin one. R‐ and S‐VFX are metabolized in the liver to the respective R‐ and S‐O‐desmethylvenlafaxine (ODVFX), R‐ and S‐N‐desmethylvenlafaxine (NDVFX), and R‐ and S‐N,O‐didesmethylvenlafaxine (NODVFX). The pharmacological profile of ODVFX is close to that of VFX, whereas the other two chiral metabolites (NDVFX and NODVFX) have lower affinity for the receptor sites. The pharmacokinetics of the VFX enantiomers appear stereoselective, including the metabolism process. In the past 20 years, several studies describing the enantioselective analysis of R‐ and S‐VFX in pharmaceutical formulations and its chiral metabolites in biological matrices were published. These methods encompass liquid chromatography coupled with UV detection, mass spectrometry, or tandem mass spectrometry, and capillary electrophoresis. This paper reviews the published methods used for the determination of the individual enantiomers of VFX and its chiral metabolites in different matrices.     

原位合成Bi3O4Br/Bi12O17Br2光催化剂及其对磺胺甲噁唑降解性能

Bi_xO_yBr_z光催化剂在有机药物废水处理领域有着非常广阔的潜在应用价值,但因光生电子和空穴的快速复合而表现出较低的光催化效率,进而限制了其应用范围。通过简易的水解-焙烧法原位制得一种新型的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂,并以磺胺甲噁唑(SMX)为模拟药物污染物进行了光催化性能测试,对所制催化剂进行了X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、电化学阻抗(EIS)、光致发光光谱(PL)等表征。结果表明所制备的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂具有较强的光生载流子分离率、较低的界面电荷转移电阻,进而展示出优异的光催化降解SMX性能,在模拟太阳光下照射30 min,SMX降解率达到87%,相较于纯的Bi₃O₄Br和Bi₁₂O₁₇Br₂催化剂,降解率分别提升了30%和24%。最后基于自由基捕获实验和催化剂能带结构分析了所制催化剂的降解机理。     

Distribution dependent stochastic differential equations

Due to their intrinsic link with nonlinear Fokker-Planck equations and many other applications, distribution dependent stochastic differential equations (DDSDEs) have been intensively investigated. In this paper, we summarize some recent progresses in the study of DDSDEs, which include the correspondence of weak solutions and nonlinear Fokker-Planck equations, the well-posedness, regularity estimates, exponential ergodicity, long time large deviations, and comparison theorems.     

原子系综中光学腔增强的Duan-Lukin-Cirac-Zoller写过程激发实验

原子系综中的Duan-Lukin-Cirac-Zoller(DLCZ)过程是产生光与原子(量子界面)量子关联和纠缠的重要手段.当一束写光与原子发生作用时,将会产生斯托克斯(Stokes)光子的自发拉曼散射,并同时产生一个自旋波(spin-wave)存储在原子系综中,上述过程即为DLCZ量子记忆产生过程.这一过程被广泛地研究.本文将87Rb原子系综放入驻波腔,并使Stokes光子与光学腔共振,我们观察到有腔且锁定的情况下Stokes光子产生概率比无腔时增大了8.7倍.在此条件下研究了Stokes光子产生概率和写光功率的关系,Stokes光子产生概率随写光功率线性增大.